Pentax Imaging - Technology Products Learning Studio

Welcome to www.pentaxtech.com, featuring PENTAX Mobility Products

PocketJet Indicator Lights & Dip Switches

PJII/200: Look at the status light sticker located under your PocketJet II or 200 printer, or in your manual, to see the meanings of the status lights. The information below is only for the PocketJet 3 and 3Plus models.

PJ3/3Plus: The three indicator lights—POWER, DATA, and ERROR— show both normal operation and error conditions for the PocketJet 3 and 3 Plus printers. Each light may appear as green, red, or orange, and may either stay lit continuously or blink. The meaning of the many possible indications of these lights is explained below. This information is also in the manual.

Key:

= Solid

= Blinking

= Alternating Blinking

= Doesn't Matter

POWER	DATA	ERROR	PJ3/3Plus STATUS
	-	-	External power in use
	-	-	Battery in use, > 14.0 Volts
	-	-	Battery in use, > 13.1 Volts
	-	-	Battery in use, > 10.0 Volts
	-	-	Battery in use, > 6.6 Volts
	-	-	Battery is discharging
	-	-	Battery is charging
		-	Printer is receiving data
		-	Unprinted data remains in buffer
		-	Printer is receiving flash upgrade
		-	Printer is in “service” mode
			Printer ready to receive flash data
			Printer is receiving flash data
		-	Printer storing flash data to flash
		-	Flash data storage is complete
			Bad checksum of flash data
	-		No battery found when charging
	-		Time-Out when charging
	-		Low Thermal Head temperature
	-		High Thermal Head temperature
			Data Receive Error